Basic info on SKANDI KRAFT iTECH MIG 220 4R

• Welding machine with 4 roller wire feeder, so the wire is fed smoothly and steadily as required. The main strength of the feeder redesign is the compatibility with longer MIG torches.
• MIG/MAG AUTO system – after entering the material, thickness and wire diameter, optimal welding parameters are set.
• PULSE and DUAL PULSE welding, for better transfer of filler material to the weld pool, boosting the quality and strength of the weld.
• Welder with an easy-to-read 3.5″ LCD display, four selectable languages and 18 memory channels to save your settings.
• For welding with 4 methods: MIG/MAG AUTO, MIG/MAG, LIFT- TIG and MMA.
• The FAN STOP system switches off the fan at idle – so the welder is quiet when powered up and fully functional, saves energy and attracts less dust. The fan automatically switches on when welding starts.
• Can connect a SPOOL GUN holder (with an integrated wire feeder), improving material transfer to the joint.
• The device adjusts the welding current after the material thickness is chosen in the LIFT-TIG method. In the MMA method, after setting the material thickness,  parameters and electrode diameter are suggested.
• Convenient dials and a clear panel make it easy to set up the welder quickly, even when wearing welding gloves.
• 2T– welding. To trigger the arc, press and hold the torch button to weld, releasing the button extinguishes the welding arc.

4T– welding. To trigger the arc, press and release the button on the welding torch for a continuous arc. To extinguish the arc press and release the button again.

• SPOT functions – designed for spot welding. The machine has a preset heat-up time and the operator just sets the welding current. This function is most often used in car repair shops
• S_2T / S_4T functions – combines two welding techniques. Spot welding, where shielding gas is discharged both before and after the welding process. In addition, a 2T and a 4T function are used together in a S_2T/S_4 method, for welding to start and finish correctly.

• It’s built with high performance IGBT components.
• Gas preheater connector (36 V) – using the socket, you can connect the regulator with the preheater or the preheater itself and heat the gas to a positive temperature.

Welder functions

MIG/MAG AUTO welding

• The automatic setting of the welder: after choosing the material, thickness and wire diameter, the machine sets itself to optimal parameters. Welding current and other settings can be manually fine-tuned.
• PULSE welding, for better transfer of filler material into the weld pool, boosting the quality and strength of the joint.
• Choice of 2T/4T, for making longer welds more comfortably.
• Choice of weld material (Carbon steel, Stainless steel, Al-Si – soft aluminium, Al-Mg – hard aluminium, Cu-Si – brazing).

MIG/MAG welding

• PULSE welding, which improves the transfer of filler material into the weld pool, boosting the quality and strength of the weld.
• 2T/4T selection, for longer welds to be made more comfortably.
• The SPOT welding function and the S_2T and S_4T welding support, i.e. shielding gas flows before and after the welding process, which rises from a lower current to the base current and finally lowers again to the crater quench setting.
• Welding material selection (Carbon steel, Stainless steel, Al-Si – soft aluminium, Al-Mg – hard aluminium, Cu-Si – brazing).
• Selection of weld material thickness.
• Determination of wire diameter. In Al-Si and Al-Mg (range 1.0-1.2), other materials from (0.8-1.2).
• Setting of wire feed speed [m/min].
• Welding current voltage setting [V].
• Adjustment of inductance ± [%].
• Pulse frequency setting in pulse mode [Hz].
• Pulse cycle adjustment [%].

MIG/MAG DUAL PULSE welding

• Peak feed speed [m/min].
• Base wire feed speed [m/min].
• Adjustable double pulse frequency [Hz].
• Adjustable double pulse duty [%].

MMA welding

• Hot Start – boosts the start of welding by temporarily increasing the welding current at the start.
• Arc Force – adjusts the length of the welding arc, to reduce or increase the depth of fusion and reduce spatter.
• VRD – turns off the arc when the electrode detaches from the material for a safer welding environment.
• Anti Stick – easier electrode detachment in the event of sticking.

LIFT-TIG welding

• Adjustable welding current [A], once set the welder prompts the thickness of the sheet metal.
• The LIFT-TIG function is equipped with a SOFT START module, for no risk of damaging the electrode when starting the welding process.

Return to factory settings by holding the “Return” button.

• SKANDI KRAFT iTECH MIG 220 4R welder with integrated 3 m 3×2.5 [mm2] power cable
• MIG torch KD24 type MB24 4 metres with Teflon graphite insert
• Additional blue steel insert 4 metres for KD24 torch, for welding with wire of 0.6 -1.0 [mm] diameter
• All-copper electrode holder 3 metres, cross section 25 [mm2]
• Wire rolls: for steel 2x 0.8-1.0 V, for aluminium 2x 1.0-1.2 U.
• Wire feeder rollers size 22/10/30 [mm].
• Gas cylinder mounting components: 2 x gas regulator mounting clamps, 2-metre gas hose, spanner, Allen key
• Current tips for KD24, MB24 torch (1x 0.8 ; 1×1.0; 1×1.0 ALU ; 1×1.2 ALU)
• Instruction manual.